Flame-Proof IM-Wood Coat

Fire retardant liquid for very difficult absorbing materials For OSB, bamboo
Data de entrega: 1-2 days
€20,51

Product description
Flame-Proof IM-Wood Coat is specially developed for flame retardant impregnation of very difficult absorbable materials such as OSB, bamboo


Treatment method
Flame-Proof IM-Wood Coat is applied by means of a sprayer or atomizer on different woods without special precautions for man and environment.
One must be sure that the surface is clean before you make the product.
Mix the product gently for 30 seconds before pouring into a sprayer or atomizer. Can be applied in two layers with a low pressure pump.
Between 3 and 4 m² per liter, depending on the porosity of the substrate.
Do not apply when rain or frost.
The temperature of the substrate should be minimun 5 ° C.


Testing and test reports
Flame-Proof IM-Wood Plus has been tested (in 2014) at Warrington Fire (Ghent) on a parquet floor. The product meets the strict European standard (for floors). The fire behavior (reaction to fire) was tested and "Bfl-s1" is the result. This is the best possible result.

Product description
Flame-Proof IM-Wood Coat is specially developed for flame retardant impregnation of very difficult absorbable materials such as OSB, bamboo


Treatment method
Flame-Proof IM-Wood Coat is applied by means of a sprayer or atomizer on different woods without special precautions for man and environment.
One must be sure that the surface is clean before you make the product.
Mix the product gently for 30 seconds before pouring into a sprayer or atomizer. Can be applied in two layers with a low pressure pump.
Between 3 and 4 m² per liter, depending on the porosity of the substrate.
Do not apply when rain or frost.
The temperature of the substrate should be minimun 5 ° C.


Testing and test reports
Flame-Proof IM-Wood Plus has been tested (in 2014) at Warrington Fire (Ghent) on a parquet floor. The product meets the strict European standard (for floors). The fire behavior (reaction to fire) was tested and "Bfl-s1" is the result. This is the best possible result.

especificações de produtos
Attribute nameAttribute value
AplicaçãoMadeira
CertificaçãoC-s2, d0
UsoInside

European Fire Reaction Rating

The fire reaction of a construction product is the totality of properties can influence the start and development of a fire. The fire reaction rating system is described in European standard NBN EN 13501-1. Seven main classes are defined (A1, A2, B, C, D, E and F) with two additional indications for smoke development (s1, s2 and s3) and the formation of burning drops and particles (d0, d1 and d2). ). Classes A1 and A2 apply to non-flammable products (eg concrete, steel, etc.), while class F applies to non-classified products or products that failed the least severe class E test.

Download here the EN 13501-1 Classification Table

For extra support,  please contact us here

*
*
*
especificações de produtos
Attribute nameAttribute value
AplicaçãoMadeira
CertificaçãoC-s2, d0
UsoInside
Etiquetas de Produtos