Flame-Proof IM-Wood Coat

Fire retardant liquid for very difficult absorbing materials For OSB, bamboo
Fecha de entrega: 1-2 dias
€20,51

Product description
Flame-Proof IM-Wood Coat is specially developed for flame retardant impregnation of very difficult absorbable materials such as OSB, bamboo


Treatment method
Flame-Proof IM-Wood Coat is applied by means of a sprayer or atomizer on different woods without special precautions for man and environment.
One must be sure that the surface is clean before you make the product.
Mix the product gently for 30 seconds before pouring into a sprayer or atomizer. Can be applied in two layers with a low pressure pump.
Between 3 and 4 m² per liter, depending on the porosity of the substrate.
Do not apply when rain or frost.
The temperature of the substrate should be minimun 5 ° C.


Testing and test reports
Flame-Proof IM-Wood Plus has been tested (in 2014) at Warrington Fire (Ghent) on a parquet floor. The product meets the strict European standard (for floors). The fire behavior (reaction to fire) was tested and "Bfl-s1" is the result. This is the best possible result.

Product description
Flame-Proof IM-Wood Coat is specially developed for flame retardant impregnation of very difficult absorbable materials such as OSB, bamboo


Treatment method
Flame-Proof IM-Wood Coat is applied by means of a sprayer or atomizer on different woods without special precautions for man and environment.
One must be sure that the surface is clean before you make the product.
Mix the product gently for 30 seconds before pouring into a sprayer or atomizer. Can be applied in two layers with a low pressure pump.
Between 3 and 4 m² per liter, depending on the porosity of the substrate.
Do not apply when rain or frost.
The temperature of the substrate should be minimun 5 ° C.


Testing and test reports
Flame-Proof IM-Wood Plus has been tested (in 2014) at Warrington Fire (Ghent) on a parquet floor. The product meets the strict European standard (for floors). The fire behavior (reaction to fire) was tested and "Bfl-s1" is the result. This is the best possible result.

Especificaciones de productos
Attribute nameAttribute value
AplicaciónMadera
CertificationC-s2, d0
UsoAdentro
Etiquetas de producto